經歷
2024年8月~至今/黎明技術學院/教務長
2023年8月~2024年7月/黎明技術學院/教務處/副教務長
2017年10月~2023年7月/萬能科技大學/設計學院/院長
2013年8月~2016年1月/萬能科技大學/通識教育中心/主任
2011年8月~2016年1月/萬能科技大學/教育發展中心/主任
2011年8月~2016年1月/萬能科技大學/教務處/副教務長
2009年10月~2011年7月/萬能科技大學/教務處/執行秘書
2000年2月~2003年1月/萬能科技大學/紡織科學系/系主任
1999年8月~2003年7月/萬能科技大學/紡織科學系/副教授
1999年8月~2011年7月/經濟部智慧財產局/專利二組六科/專利審查委員
1995年8月~1998年7月/萬能工專/紡織工程科/科務助理
1995年8月~1999年7月/萬能工專/紡織工程科/副教授

學歷:
逢甲大學/紡織工程系/學士
逢甲大學/紡織工程研究所/碩士
逢甲大學/紡織工程研究所/博士

期刊論文
2024
Jiang-Chiang Chen*, Wen-Chin Tsen and Maw-Cherng Suen, ANUFACTURING AND PROPERTIES OF SANDWICH COMPOSITES WITH A 3D PRINTING CORE LAYER, manuscript submitted to Modern Physics Letters B, August 01, 2024, (SCI), 本人為第一作者、通訊作者.

2023
Jieng-Chiang Chen*, Chang-Mou Wu and Jia-Sheng Li, Preparation and mechanical properties of plain jute rope fabric reinforced polylactic acid composites, Modern Physics Letters B, 23 February 2023, DOI: 10.1142/S0217984923400341, (SCI), 本人為第一作者、通訊作者.

2022
{1}Sanjay Kumar, Chang-Mou Wu*, Po-Chun Lin, Jieng-Chiang Chen, and Yoshinobu Shimamura, Strain concentration of double-edge hole ductile composites in the full range of deformation by digital image correlation, EXPRESS POLYMER LETTERS, 16 (4). pp. 439-450. (SCI), DOI: 10.3144/expresspolymlett.2022.76.

{2}Chang-Mou Wu, Sanjay Kumar, Po-Chun Lin & Jieng-Chiang Chen, Strain and stress concentration of ductile composites in full-range deformation by digital image correlation, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 03 Jun 2022, (SCI), DOI: 10.1080/15376494.2022.2084192.

2021
Chang-Mou Wu, Po-Chun Lin, Sanjay Kumar, Jieng-Chiang Chen, Long-term open-hole tensile creep properties of self-reinforced PET composites measured by digital image correlation, Materials Chemistry and Physics, 14 December 2021, DOI: 10.1016/j.matchemphys.2021.125633, (SCI).

2020
{1}Jieng-Chiang Chen* and Xui-Zhi Yang (2020, March). Bending and compression of glass fabriccorrugated paper-epoxy sandwich composites. Modern Physics Letters B, Vol. 34, Nos. 7-9, 2040003-1~2040003-5. (SCI), DOI: 10.1142/S0217984920400035, 本人為第一作者、通訊作者.

{2}Jieng-Chiang Chen* and Yi-Fang Zhuang (2020, March). Tension and compression of sandwich composites with weft-knit fabric cores. Modern Physics Letters B, Vol. 34, Nos. 7-9, 2040004-1~2040004-5. (SCI), DOI: 10.1142/S0217984920400047, 本人為第一作者、通訊作者.

2019
{1}Jieng-Chiang Chen* and Yi-Ting Lin (2019, May). Tension and compression of jute fabric/corrugated paper/reinforced polylactic acid resin sandwich composites. Modern Physics Letters B, Vol. 33, Nos. 14 & 15, 1940004-1~1940004-5. (SCI) 本人為第一作者、通訊作者.

{2}Jieng-Chiang Chen* and Bo-Yan Huang (2019, May). Flame-retardant corrugated paper/epoxy composite materials. Modern Physics Letters B, Vol. 33, Nos. 14 & 15, 1940003-1~1940003-5. (SCI) 本人為第一作者、通訊作者.

2018
{1}Jieng-Chiang Chen* (2018, July). Bending and impacting of sandwich composites with a corrugated paper core layer. International Journal of Modern Physics B, Vol. 32, No. 19, 129-133. (SCI) 本人為第一作者、通訊作者 (SCI).

{2} Jieng-Chiang Chen* and Jian-Cheng Lin (2018, July). Manufacturing and properties of cotton and jute fabrics reinforced epoxy and PLA composites. International Journal of Modern Physics B, Vol. 32. No. 19 pp.149-153. (SCI)本人為第一作者、通訊作者.

2011
{1}J. C. Chen, C. M. Wu*, F. C. Pu, C. H. Chiu (2011, Mar). Fabrication and mechanical properties of self-reinforced poly(ethylene terephthalate) composites. eXPRESS Polymer Letters, Vol.5, No.3 p. 228–237. (SCI). NSC 97-2622-E-238-003-CC3.

2016
{1}Jieng-Chiang Chen*, Bo-Yan Huang（2016 年05 月）。防水瓦楞紙複合板材之阻燃及抗壓縮性質。燃燒季刊，Vol. 25. No. 2, pp.68-82。科技部：102-2622-E-238-003-CC3。本人為第一作者、通訊作者。

2014
{1}陳錦江、吳昌謀、鄧一安、許智傑、林子傑（2014 年07 月）。Effects of Fabric Structures on the Bending and Impacting Properties of Jute Fabrics Reinforced Composites。紡織綜合研究期刊，Vol.24. No. 3 pp.14-23。國科會：100-2622-E-238-001-CC3。本人為第一作者、通訊作者。

研討會論文
2025
{1}陳錦江,“三明治複合材料其芯層結構之研製”, 第48屆高分子學術研討會, (2025).

{2}巫文城,陳錦江,“影響紡織業選擇供應商的關鍵因素研究——以臺灣 X 公司為例”, 2025「管理思維與實務」暨「應用科學」研討會.

{3}張芝瑜,陳錦江,“快時尚時代AI產製布料花樣模式之探討-以鐵窗花為例”, 2025年台灣紡織研究論文發表會.

2024
{1}陳錦江,”Weaving Characteristics and Impacting Properties of Sandwich Composites Utilizing a 3D Honeycomb Preform as the Core Layer”, 10th International Conference on Advanced Materials Development and Performance, (AMDP 2024)

2023
{1}J. C. Chen*, W. C. Tsen, and C. M. Wu, Manufacturing Pickleball Rackets with Sandwich Composite Construction and 3D Printing Core Layer, Materials Science and Technology in Europe EUROMAT 23, 03-07 September. 2023, 第一作者及通訊作者。

{2}K.G.Motora1,C.M.Wu*,and J.C.Chen,Fabrication of highly-efficient multifunctional Cs0.33WO3@g-C3N4 based nanocomposites immobilized in CF@Rayon/PU Janus membranes for photothermal conversion, water evaporation, synergic photocatalysis and its practical application in wastewater treatment, Materials Science and Technology in Europe EUROMAT 23, 03-07 September. 2023.

{3}Jieng-Chiang Chen*, W. C. Tsen, and Chang-Mou Wu, Manufacturing and Properties of Sandwich Composites with a 3D Printing Core Layer, The 4st International Conference on Nanomaterials and Advanced Composites (NAC 2023), Busan/Korea, November 17-20, 2023, 第一作者及通訊作者。表 CM16A 共21 頁 第 20 頁
2022
{1}Jiang-Chiang Chen*, Chang-Mou Wu, Chun-Han Lin and Jia-Sheng Li, Plain Jute Rope Fabric-Reinforced Polylactic Acid Composites, The 3nd International Conference on Nanomaterials and Advanced Composites (NAC 2022), Tokushima/Japan (07/2022), 第一作者及通訊作者。

{2}Chun-Han Lin, Chang‐Mou Wu, Jiang-Chiang Chen and Yi-An Xiao, Effects of Fiber Stitching on the Mechanical Properties of Carbon/Carbon Composites, The 3nd International Conference on Nanomaterials and Advanced Composites (NAC 2022), Tokushima/Japan (07/2022).

2019
{1}Jieng-Chiang Chen (2019, July) Bending Properties of Three-Dimensional Glass Fabric Reinforced Epoxy Composite T-beam. The 6th Global Conference on Polymer and Composite Materials (PCM 2019), Bangkok, Thailand. 本人為第一作者、通訊作者.

{2}Jieng-Chiang Chen* and Xiu-Zhi Yang (2019, Aug.) Bending of Glass Fabrics/Corrugated Paper/Epoxy Sandwich Composites. The 2nd International Conference on Nanomaterials and Advanced Composites (2019, Aug.), 本人為第一作者、通訊作者.

{3}Jirng-Chiang Chen* and Yi-Fang Zhuang, (2019, Aug.), Manufacturing and Properties of Sandwich Composite with Weft Knitting Fabric Core, The 2nd International Conference on Nanomaterials and Advanced Composites, 本人為第一作者、通訊作者.

{4}陳錦江*, (2019, April), 三次元織物織造及其應用與性能評估, 海峽兩岸紡織服裝新材料、新工藝、新技術研討會, 本人為第一作者、通訊作者

.
{5}Jieng-Chiang Chen*,Pin-loaded Characteristics of 3-D Carbon Fabric Reinforced Epoxy Composites. PHENMA 2019 (2019 International Conference on Physics and Mechanics of New Materials and Their Applications and Exhibition), Busan. Korea. 本人為第一作者、通訊作者.

2018
Chang-Mou Wu, Po-Chun Lin, Jieng-Chiang Chen, Ri-ichi, Murakami. (2018, Aug.) The study of stress concentration of self-reinforced PET composites by digital image correlation and finite element method PHENMA 2019 (2019 International Conference on Physics and Mechanics of New Materials and Their Applications and Exhibition), Busan. Korea.

2017
{1}Jieng-Chiang Chen (2017, July). Manufacturing and Properties of Cotton and Jute Fabrics Reinforced PLA Composites. AMDP 2017 (International Conference on Advanced Materials Development and Performance 2017), Pune, India. 本人為第一作者、通訊作者.

{2}Jieng-Chiang Chen (2017, July). Three-Dimensional Jute Fabrics Reinforced Polylatic Acid Composites. ICMRT 2017 (International Conference on Materials Research and Technology 2017), Aggarwal, India. 本人為第一作者、通訊作者.

2016
Jieng-Chiang Chen and Yi-An Teng (2016,July).Interfacial Strength of Twaron Fiber/PCL Composite Materials. 32nd, International Conference of the POLYMER PROCESSING SOCIETY , LYON FRANCE. 本人為第一作者、通訊作者.

2015
{1}C.M.Wu,M.H.Chou,J.C.Chen,J.Y.Lee,K.B.Cheng(2015, Jul). SOUND ABSORPTION OF ELECTROSPUN POLYVINYLIDENE FLUORIDE/CARBON NANOTUBE MEMBRANES. 20th International Conference on Composite Materials, Copenhagen, Denmark.

{2}Jieng-Chiang Chen, Chang-Mou Wu, Jia-Sheng Li1, Kuo-Bin Cheng (2015,Jul). TENSILE CHARACTERISTICS OF JUTE ROPE PLAIN FABRIC REINFORCED POLYLACTIC ACID COMPOSITES. 20th International Conference on Composite Materials,ICCM 20, Copenhagen. MOST 100-2622-E-238-001-CC3. 本人為第一作者、通訊作者.

2014
Jieng-Chiang Chen, Chang-Mou Wu, Po-Yan Huang, Yi-An Teng (2014, Jun). MECHANICAL PROPERTIES OF JUTE/PLA SANDWICH COMPOSITES WITH CORRUGATED BOARD AS A表 CM16A 共21 頁 第 21 頁 CORE LAYER. ECCM16 – 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain. MOST 102-2622-E-238-003-CC3. 本人為第一作者、通訊作者.

專利
{1}發明專利8件
{2}新型專利29件
{3}技術轉移20件

專書
書名:編織技術

證照
{1}行政院環保署甲級證照~毒性化學物質專業技術管理人員合格證書
{2}行政院勞動部乙級證照~勞工安全管理人員合格證書
{3}中華民國電腦教育發展學會 丙級證照-Excel 2010專業級
{4}中華民國電腦教育發展學會 丙級證照-Word 2010專業級
{5}微軟公司~乙級證照-Microsoft MOCC 高級監評人員
{6}ACA 國際證照Adobe Systems Incorporated ~Adobe Photoshop CS5
{7}Silicon Stone Education-(SSE)國際認證全球攝影國際證照~ Photography
{8}中華民國電腦教育發展學會~APP Inventor 雲端手機程式設計

近五年計畫
{1}科技部計劃22件
{2}民間產學案11件

獲獎與榮譽
{1}國際競賽~7次(3金3銀1特別獎)
{2}國際發明競賽金牌3面、銀牌2面、特別獎1面
{3}台北國際發明競賽銀牌1面
{4}指導學生獲獎~21次(2金3銀3銅3優勝10佳作)
{5}國內創意競賽銀牌2面、銅牌1面、佳作2面。
{6}國內研討會論文競賽第1名1面、第3名1面、優勝2面、佳作6面。
{7}專題競賽第1名1面、第2名1面、第3名1面、優勝1面、佳作2面
{8}優良導師1次，教學優良1次
{9}受邀參展7次，媒體報導5次

社會服務
審查委員:
{1}工業局中小企業及時案
{2}工業局協助傳統產業技術升級計畫
{3}彰化縣政府紡織產業提升計畫
{4}經濟部標準檢驗局國家標準
{5}國際期刊審查委員~ Journal of Modern Physics B,
{6}Journal of Modern Physics B Letters,
{7}Materials Sciences and Applications,
{8}ACS Sustainable Chemistry & Engineering
理監事:
尖端材料協會(SAMPE)監事、尖端材料協會(SAMPE)理事
國際會議:
committee 45次、section chairmen 2次、invited speaker 4次